Sharp VC-A410X

|Q Setting the Clock
When you use the VCR
for the first time or after a
power failure of more
than 60 seconds the
clock will be reset. Apply
power to the unit to
switch it on and press the
MENU button. Then per 
form the following pro 
cedure.
OPERATE
(VC-A410X)
O
SET MENU
AM/PM
INITIAL SETTING OF CLOCK
◄ /►/A/V
buttons
OPERATE
AM/PM
Numeric
buttons
(VC-H610X)
Numeric
buttons
buttons
O First set the language (Refer to page 10). Then press the SET button.
▲
or
CLOCK
MOD E TIME DATE YEAR
[23 12:00AM 1/01 00
MODE :24H/12H
SELECT :◄ ► CHANGE:A ▼
ENTER : SET EXIT sMENU
> ►
@ Select whether the clock should show 12-hour AM/
PM time or 24-hour time by pressing the A/V
buttons, and then press the ► button.
Ex.: 12H
I NOTE >
• “ 24H ” ....................... 24-hour display.
• “ 12H ” ............................ 12-hour AM/PM display.
• 12H (AM/PM) mode is preset at the factory.
Numeric
buttons
or |
A/T
| CLOCK
MODE TIME DATE YEAR !
12H 1/01 0 0
| MODE :24H/12H
SELECT :◄ ► CHANGE:A ▼
ENTER : SET EXIT : MENU
* k
© Set the present time with the numeric or A/V but 
tons on the remote control and then press the ►
button. (First set the ‘ hour ’ digits and then the ‘ min 
ute ’ . If there is only one ‘ hour ’ or one ‘ minute ’ digit,
enter a 0 first.) Set AM or PM, using the AM/PM
button. (12 hour)
Ex.: 10:28AM .
I NOTE >
• If 12H mode was selected, then set the AM/PM
indicator.
Numeric
buttons
or
A/V
CLOCK
MODE TIME DATE YEAR
12H 10:2 8AM HtWiW 0 0
DATE :DAY/MONTH
♦ ►
© Set the date with the numeric or A/V buttons on
the remote control, and then press the ► button.
(First set the ‘ day ’ digits and then the ‘ month ’ . If
there is only one ‘ day ’ or one ‘ month ’ digit, enter a
0 first.)
Ex.: Dec. 15(15/12)
Numeric
buttons
or
A/T
CLOCK
MODE TIME DATE YEAR
12H 10:28AM 15/12 EH
© Set the year digits with the numeric or A/V but 
tons on the remote control. (If there is only one
‘ year ’ digit, enter a 0 first.)
Ex.: 97
SET MENU
® » o
© Press the SET button. To return to the Normal
screen, press the MENU button.
CHANGING THE CLOCK SETTING
• If the clock has already been set previously and you want to change it, select “ clock ” from the MENU, and then
follow the procedures above.
MENU k
o»
MENU
TIMER
MODE
CHANNEL PRESET
LANGUAGE
A SET
V ♦©
O Press the MENU button.
Select item “ CLOCK ” with the A/V buttons and
press the SET button.
± Normal
Screen
© To return to Normal Screen, press the SET button.
11