Sharp VC-A410X - Timer Recording Procedure (Part 2)

a
Recording with the Timer
Numeric
buttons
or
A/V
When the
clock is set to
24H mode,
“ AM/PM ” will
not appear.
♦ ►
© Set the start time with the numeric buttons or A I
▼ buttons and press the ► button.
[Stop]
Numeric
buttons
or
A/V
1/2
DATE PR START STOP
15/12 47 12 : OOFMEEKliIQsP
© Set the stop time with the numeric buttons or A /
▼ buttons and press the ► button.
[Tape Speed]
DATE PR START STOP
15/12 47 12 : 00PM12 : 30PI®
or
© Select the tape speed with A or ▼ button. (See
Intelligent Timer Recording (JUST REC) on
page 28.)
I NOTE >
• SP: Standard Play
• LP: Long Play
[Timer review]
© Press the SET button. To programme additional
timer settings, repeat steps © through ©.
SET
o
MENU
o ♦
Normal Screen
© To return to the Normal Screen, press the MENU
button.
© To set the VCR for automatic timer recording,
press the TIMER ON/OFF button and ensure the
indicator lights on the VCR display.
I NOTE >
• If the video cassette runs out before recording all the programmes, your VCR will stop, eject the cassette, and shut
off automatically.
• If power is interrupted for more than 1 minute (power failure, etc.), all timer settings will be cancelled.
• If the TIMER ON/OFF button is pressed when there is no cassette loaded, “ 0 ” flashes for 5 seconds, indicating
that timer recording is not possible.
• If the TIMER ON/OFF button is pressed while a cassette with an uncovered erasure protection hole is loaded, “ 0 ”
flashes and the cassette is ejected.
• When “ 0 ” is lit, regular VCR operation, clock setting and setting/cancelling/confirming timer positions are not
possible. For regular VCR operation, clock setting and setting/cancelling/confirming timer positions, press the
TIMER ON/OFF button to disengage the timer ( “ 0 ” disappears), and then turn on your VCR.
• During timer recording, the timer cannot be set.
• To terminate timer recording, press the STOP button during timer recording.
• If no buttons are pressed within one minute while setting a timer programme position, the mode automatically
returns to the previous mode.
• If the same time is input for the start time and the stop time, the timer setting will be cancelled.
26