EasyManua.ls Logo

Sharp VL-E78E

Sharp VL-E78E
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
TO PREVENT SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This equipment should be used with DC 3.6 V =
only or recommended AC adapter.
CAUTION
To prevent electric shocks and fire hazards, do
NOT use any other power source.
Important:
Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Please
refer to relevant laws in your country.
CAUTION
To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified dealer or service centre.
Power supply:
This unit can be operated by connecting it to
either the AC adapter, battery pack, or optional
car battery adaptor/battery charger. The AC
adapter incorporates the AUTO VOLTAGE (AC
11 O-240 V, 50/60 Hz) function.
This VIEWCAM does not have a PCM recording or playback function. PCM recordings made using other
VCRs or audio dubbing cannot be played back on this unit.
Your VIEWCAM is designed to record in SP mode only. It will not perform normal playback for programmes
prerecorded in LP mode.
If you record on a tape on which PCM sound has already been recorded, the audio track of the new
VIEWCAM recording may not come out when the tape is played back on a PCM-capable VCR. If this
occurs, set the VCR’s audio monitor select switch to the “Standard” position.
NOTE
The VIEWCAM’s LCD panel is a very high technology product with close to 90,000 thin-film transistors*,
giving you fine picture detail. Occasionally, a pixel may appear on the screen as a fixed point of blue, green,
red, or black. Please note that this does not affect your VIEWCAM’s performance.
*Specifications are subject to change without notice.
Information for Australia/New Zealand only
WARNING:
This Camcorder must be supplied with D.C. 3.6 volts only from a BT-N1 or BT-H21 battery, the AC
adapter (UADP-0208TAZZ) or the optional VR-33CH car battery adapter/battery charger or the
optional VR-410CA car battery adapter.
CAUTION:
As there are no user-serviceable parts inside the Camcorder or AC adapter, do NOT remove their
cabinets as touching parts inside could result in electric shock. Please refer servicing to a qualified
dealer or a Camcorder service centre approved by Sharp.
NOTE
This VIEWCAM is a high technology product.
The LCD Panel comprises 89,856 TFT Transistors. Due to the high density of transistors, it is possible that
some pixels may fail.
Important:
Copyright may exist in material you wish to record.
Copying such material without permission of the relevant licensees or owners of the copyright is prohibited
by law.
Sharp is not in a position to authorize the recording of copyright works and nothing in this operation manual
should be read or implied as giving that authority.

Related product manuals