Sharp XE-A212 - Page 54

52
Job code: 62
* Item: Selection: Entry:
A Always enter 0. 0
B Error beep for misoperation Lock error 0
Misoperation* 1
C Key catch sound Yes* 0
No 1
D Buffered keyboard Yes* 0
No 1
E Void mode Enable* 0
Disable 1
F Printing of void mode in X2/Z2 report Yes* 0
No 1
G Printing of void mode in X1/Z1 report Yes* 0
No 1
H Addition to the hourly total in VOID mode No* 0
Yes 1
Job code: 63
* Item: Selection: Entry:
A Receipting at the time of “no sale” entry Yes* 0
No 1
B No sale after non-add code entry Disable 0
Enable* 1
C Non-add code entry Enable* 0
Disable 1
D Copy receipt No* 0
Yes 1
E Entry that causes the merchandise Enable* 0
subtotal to be smaller than zero Disable 1
F Subtotal entry before tendering Noncompulsory* 0
Compulsory 1
G Subtotal entry before direct non-tender Noncompulsory* 0
finalization Compulsory 1
H Direct non-tender finalization after Disable 0
tendering Enable* 1
Job code: 64
* Item: Selection: Entry:
A Printing of GT1 on Z report Yes* 0
No 1
B Printing of GT2 on Z report Yes* 0
No 1
C Printing of GT3 on Z report Yes* 0
No 1
D Printing of Training GT on Z report Yes* 0
No 1
E Printing of Z counter on Z report Yes* 0
No 1
F Printing of DATA on PLU resetting report Yes* 0
No 1
G Resetting of GT1, 2, 3 at the general Z1 No* 0
report Yes 1
H OP X/Z report Enable* 0
Disable 1
A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 52