Sharp XE-A212 - EURO Programming Functionality; EURO System Settings; Automatic EURO Modification Settings

57
Thermal printer density
* 50 (100%) is the default setting. To make the print darker, set a larger number, and to make the print lighter,
set a smaller number.
Language selection
*Language: 0: English 1: German 2: French 3: Spanish
By default, English is set.
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to page 45), which you programmed, will be reset to the default settings. The language
selection must be made before programming clerk names, logo messages and function texts.
EJ memory type
When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
*A: 0 for EJ 8000 lines and PLU 1200 codes
1 for EJ 9000 lines and PLU 210 codes (default)
s
90
@
0
A
PrintKey operation example
A
*A
s@
90
s
88
@
1
A
PrintKey operation example
*Language
(0-3)
A
To set “0”
s@
88
s
50
@
70
sA
PrintKey operation example
*Printer density
(00-99)
As
To set “0”
s@
50
A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 57