Sharp XE-A23S - Plu; PLU Range

53

■
PLU
NOTE
• To delete a PLU item in the “PLU” window, select the item and press the
D
key. A conrmation
window appears to ask you whether to delete the item, select the option you prefer.
Procedure
Program each item as follows:
Select a pertinent PLU code, or directly
enter a PLU code.
•PRICE(Usethenumericentry)
Unit price of each price level (max. 8 digits)
•Description(Usethecharacterentry)
Description for a PLU. Up to 16 characters can be entered.
(Default text: PLUnnnnn)
•TYPE(Usetheselectiveentry)
Type of unit price entry for PLUs
INHIBIT: Inhibited
OPEN: Open only
PRESET: Preset only
OPEN & PRESET: Open & preset
•DEPT.CODE(Usethenumericentry)
Department code to be associated with the entered PLU
(01 through 99)
When a PLU is associated with a department, the following functions of the PLU depend on the
programming for the department.
• Single item cash sale
• Taxability

■
PLUrange
You can program PLUs in the designated range.
Procedure
Enter a value or select an option for each item as follows:
•START(Usethenumericentry)
Starting PLU code (max. 5 digits)
•END(Usethenumericentry)
Ending PLU code (max. 5 digits)
•OPERATION(Usetheselectiveentry)
DELETE: Enables you to delete a specied range of
PLUs.
MAINTE.: Enables you to change the setting you have
programmed.
NEW&MAINTE.: Enables you to change the current setting
when the specied codes have already been
created or to create new codes when the
specied codes have not been created yet.