Sharp XE-A23S - Z Counter; Z1 General Report; Electronic Journal

75

■
ZCounter
Procedure
GENERALZ1: Max.4 digits (0000 to 9999)
GENERALZ2: Max.4 digits (0000 to 9999)

■
Z1Generalreport
Procedure
•SD:SAVESALES(Usetheselectiveentry)
YES: Save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
•SD:SAVEEJ(Usetheselectiveentry)
YES: Save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
•SD:SAVEALLRAM(Usetheselectiveentry)
YES: Save the all RAM data in the SD card.
NO: Not to save the all RAM data in the SD card.
•CLEAREJ(Usetheselectiveentry)
YES: Clear the electronic journal data
NO: Not to clear the electronic journal data
•RESETGT(Usetheselectiveentry)
YES: Reset the GT
NO: Not to reset the GT

■
ElectronicJournal
Procedure
Program each item as follows:
•STORETOSD(Usetheselectiveentry)
When the EJ data is recorded on the SD card:
AS IS: Control characters are recorded as they are
W SPACE: Control characters are recorded as space.
•TRDATASTORE(Usetheselectiveentry)
YES: Record the electronic journal data in the training mode.
NO: Not to record the electronic journal data in the training
mode.
•XDATASTORE(Usetheselectiveentry)
When the X report data in the electronic journal is recorded:
HEADER: Record only the header of X report in the electronic
journal
DETAIL: Record the detail of X report in the electronic
journal