Sharp XE-A401

37
Percent rate limitation for
%
and
&
• Percent entries that exceed the upper limit may be overridden in the MGR mode.
• 10.00% can be entered as
10
or
10P00
. The
P
key is needed only
for fractional entry.
Function parameters for
%
,
&
and
-
*: Item: Selection: Entry:
A Tax 4 status Taxable 1
Non-taxable 0
B Tax 3 status Taxable 1
Non-taxable 0
C Tax 2 status Taxable 1
Non-taxable 0
D Tax 1 status Taxable 1
Non-taxable 0
E +/- sign + (premium) sign 0
- (discount) sign 1
F Item % / Item
_
Allow 0
Disallow 1
G Subtotal % / Subtotal
_
Allow 0
Disallow 1
H Entry digit limit for discount key 0-7
When programming for percent keys, always enter 0 for H.
Tax status (taxable 1 through 4 / non-taxable)
• When taxable is selected, tax is applied to the amount obtained after premium or discount calculation.
+/- sign
• Programming of the +/- sign assigns the premium or discount function for each key.
*ABCDEFGH or
%@
-
A&
To program for another key
To program “0” for all items
Percentage limit
s
29
@
15
P
00
%
A
PrintKey operation example
s @29
Percentage limit (0.00 -100.00%)
A
To program zero
To program for another percent key
or
%&