Basic Operation
-37
×1 ×4 ×9 ×16 ×36 ×64×2 ×3
"On-screen display
Mouse/adjustment
button ('/"/\/|)
MAGNIFY
(enlarge/reduce)
buttons
UNDO button
RESIZE button
MUTE button
Turning Off the Sound
Temporarily
Press MUTE on the remote control
to temporarily turn off the sound.
Note
• Pressing MUTE again will turn the sound back on.
Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of projected
images can be enlarged. This is helpful when
providing more detailed explanations.
1 Press MAGNIFY on the re-
mote control.
• Enlarges the image.
• Pressing
or enlarges or re-
duces the projected image.
Note
• You can change the location of the en-
larged image using ', ", \ and |.
2 Press UNDO on the remote con-
trol to cancel the operation.
• The magnification then returns to ×1.
Note
In the following cases, the image will
return to the normal size (×1).
- When switching the input mode.
- When UNDO has been pressed.
- When the input signal is changed.
-
When the input signal resolution and
refresh rate (vertical frequency) change.
- When RESIZE has been pressed.
To Next Page
Loading...
Need help?
General
