Sharp XL-30H

– 9 –
XL-30H/30W
6
Listening to a tape
3
2
1
4
5
1
2
5
3
4
6
1
2
6
7
5
PUSH CLOSE
3
CD EJECT
4
Label side up
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until “FM” or “AM” appears.
3
Press the BAND button to select FM ST, FM or AM.
4
Press the TUNING ( or ) button to tune into a station.
5
Adjust the VOLUME control.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until “Cd” or “no dISC” appears.
3
Press the CD EJECT button to open the CD compartment.
4
Place a CD on the spindle.
5
Close the CD compartment by pushing the corner marked “PUSH CLOSE”.
6
Press the /CD button.
7
Adjust the VOLUME control.
5
Listening to a CD Listening to the radio
7
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until “TP” appears.
3
Open the cassette door by pushing the area marked “ PUSH EJECT”
4
Load a cassette.
5
Press the button.
6
Adjust the VOLUME control.
8
Recording from a CD
1
Press the ON/STAND-BY button to turn
the power on.
2
Press the FUNCTION button until “Cd” or
“no dISC” appears.
3
Load a CD and a recordable cassette.
4
Press the REC PAUSE button.
5
Press the button.
● Do not touch the laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently with a dry cotton swab.
● CD pickup cleaning
1
2
5
3
4