XL-DK225
2 – 4
[3] Standard Specification Of Stereo System Error Message Display Contents
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' will only be
display when error had been detected for the 5
th
times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occurred, the unit will automatically enter to stand-by
mode and Timer indicator will flashing as below.
Example: In case of speaker abnormal
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the POWER ON/STAND-BY button to enter stand-by mode.
2. While pressing down the button and the button, press the button. The Micro Computer version
number will be displayed as "X5U_10**".
3. Press the button until "WAIT"--> "FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
Error Contents DISPLAY Notes
CD CD Changer Mechanism Error. ‘ER-CD**’ (*) 10: CAM SW Detection NG during normal operation
11: CAM SW Detection NG during initialize process
20: TRAY SW Detection NG during normal operation
21: TRAY SW Detection NG during initialize process
Focus Not Match/IL Time Over. ‘NO DISC’
TUNER PLL Unlock.
FM MHz
PLL Unlock.
87.50
TIMER
LED OFF OFF
OFF
1
OFF OFF OFF OFF
FRAME
(REPEAT)
FLASHING FLASHING
NO. 2
NO. 2
ON
ON ON ON
NO. 1 : +B PROTECTION
NO. 2 : Speaker abnormal
NO NO. 1.1
3
4
4
To Next Page
Loading...
