XL-E75H_OM_EN.fm
E-10
2009June 1
Changing the setup menu (continued)
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust
the sound range.
(*2)
Selecting resolution in SCART/COMPONENTS output has no effect on the SCART/COMPONENTS output resolution.
Note:
When playing the disc with a fixed video format, it will not change
even if the TV screen size is changed.
Setup menu Selectable parameters (* indicates default setting) Description
PARENTAL 1 KID SAFE
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC 17
8 ADULT*
Set a restriction level for DVD
viewing. (For details, see page
11)
PASSWORD
PASSWORD
CHANGE See page 11 for password
setting.
DEFAULT RESET This resets all setting (Except
for Parental and Password) to
factory default.
TV display setting
Indicator Setting
4:3
PANSCAN
When playing a wide image
(16:9) disc, the left and right
sides of the image are cut
(pan scan) to display a
natural-looking 4:3 size
image.
A wide image disc without pan
scan is played back in
4:3 letterbox.
A 4:3 disc is played in 4:3.
4:3
LETTERBOX
When playing a wide image
(16:9) disc, black bands are
inserted at the top and bottom
and you can enjoy full wide
images (16:9) on a 4:3 size
TV.
A 4:3 disc is played in 4:3.
16:9 A wide image (16:9) is
displayed when playing a
wide image (16:9) disc.
z When playing a 4:3 image disc, the image size
depends on the setting of the connected TV.
z If you play back a wide image (16:9) disc with
this unit connected to a 4:3 TV, the vertically
shrunk image is displayed.
WIDE
SQUEEZE
When play 4:3 disc with this
unit connected to a 16:9 TV
(wide screen TV), the
horizontally expended image
is displayed. If you use this
setting, a natural looking
image 4:3 size can be viewed
with the black bands are
inserted at the left and right of
the screen.
z If you playback a wide image (16:9) disc with
4:3 TV, the vertically shrunk image is displayed.
TV type setting
Indicator Setting
AUTO Select this mode for the multi-system TV.
NTSC Select this mode for the NTSC TV.
PAL Select this mode for the PAL TV.