04/5/26 XL-MP333H_MP444H_E.fm
E-29
ENGLISH
TINSZA022SJZZ
XL-MP333H
XL-MP444H
Advanced Features
Listening to sound from a USB-connected PC
" System requirements
Connect a PC to the USB port. You can play audio data stored on
the PC through the supplied speakers.
The following hardware are required for USB connection:
Notes:
! Sharp does not guarantee proper operation on all computers.
! You cannot operate the unit on a PC, and vice versa.
! IBM and PC/AT are registered trademarks of International Busi-
ness Machines Corporation in the United States.
! Macintosh is a registered trademark of Apple Computer, Inc. in
the United States and/or other countries.
! MMX and Pentium are trademarks or registered trademarks of
Intel Corporation.
! Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
! The names of other systems and products in this manual are
trademarks or registered trademarks of the corresponding com-
panies. Symbols and are omitted.
" Installing a driver
If this is your first time connecting to a PC, follow the on-screen
instructions to install a driver (included with the OS). Once installed,
you do not need to repeat the procedure.
For installation, refer to the operation manual for the PC.
PC IBM PC/AT compatible Apple Macintosh computer
OS Windows 98 Second Edition
Windows 2000 Professional
Windows Millennium Edition
Windows XP Home Edition
Windows XP Professional
Mac OS 10
USB Available USB port (USB 1.1)
CPU MMX Pentium processor (266 MHz or higher) or equivalent
1 Turn on a PC to boot the OS.
2 Press the ON/STAND-BY button on the main unit to turn
the power on.
3 Connect the unit to the PC with a USB cable.
PC
USB connection cable
(not supplied)
To the USB socket To the USB port
To Next Page
Loading...
Need help?
General
