Sharp XL-MP333H User Manual

04/5/26 XL-MP333H_MP444H_E.fm
E-39
ENGLISH
TINSZA022SJZZ
XL-MP333H
XL-MP444H
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" General
" Amplifier
Power source AC 230 V, 50 Hz
Power consumption
XL-MP333H Power on: 48 W
Power stand-by: 0.6 W (*)
XL-MP444H Power on: 90 W
Power stand-by: 0.6 W (*)
Dimensions Width: 160 mm (6-5/16")
Height: 240 mm (9-7/16")
Depth: 300 mm (11-13/16")
Weight
XL-MP333H 4.8 kg (10.6 lbs.)
XL-MP444H 5.9 kg (13.0 lbs.)
(*) This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode. Refer to page
10 to cancel the demonstration mode.
Output power
XL-MP333H PMPO: 120 W
MPO: 60 W (30 W + 30 W) (DIN 45 324)
RMS: 40 W (20 W + 20 W) (DIN 45 324)
RMS: 30 W (15 W + 15 W) (DIN 45 500)
XL-MP444H Front speakers:
PMPO: 180 W
MPO: 90 W (45 W + 45 W) (DIN 45 324)
RMS: 60 W (30 W + 30 W) (DIN 45 324)
RMS: 45 W (22.5 W + 22.5 W) (DIN 45 500)
Subwoofer:
PMPO: 120 W
MPO: 60 W (DIN 45 324)
RMS: 40 W (DIN 45 324)
RMS: 30 W (DIN 45 500)
Output terminals Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: RCA type 1
(XL-MP333H)
Speakers: 6 ohms
(XL-MP444H)
Front speakers and subwoofer: 6 ohms
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
Video input: RCA type 1
USB input: USB type 1

Sharp XL-MP333H Specifications

General

Brand	Sharp
Model	XL-MP333H
Category	Stereo System
Language	English