04/5/26 XL-MP333H_MP444H_E.fm
E-35
ENGLISH
TINSZA022SJZZ
XL-MP333H
XL-MP444H
Advanced Features
Timer and sleep operation (continued)
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
6 Within 30 seconds, press the PRESET ( or ) button to
specify the minute to start, then press the MEMORY/SET
button.
! Settings are displayed in order and the unit will enter the tim-
er stand-by mode.
! Timer set indicator will light up.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
8 The unit will enter the power stand-by mode one hour after
the timer playback starts.
Note:
When performing timer playback using an-
other unit connected to the video and audio
input or USB sockets, select "AUX" or "USB"
in step 2.
At this time, only this unit will be turned on or
enter the power stand-by mode automatical-
ly. It will enter the power stand-by mode 1
hour after the playback starts. However, the
other unit will not be turned on or off.
To Next Page
Loading...
Need help?
General
