Sharp XL-UH1H User Manual

E-
Repeat steps 2 -  for other tracks. Up to 2 tracks
can be programmed. If you make a mistake, press
the CLEAR button whilst the “MEMORY” indicator
is ashing. Each time the button is pressed, one
track will be cleared, beginning with last track
programmed.
Press the button to start playback.
Press the CD button. The total number in memory
will appear.
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is
lit, press the CLEAR button on the remote control. The
“MEMORY” indicator will disappear and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY”
indicator will be displayed. Follow steps 1 - 4 to add tracks.
The new tracks will be stored after the last track of the
previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the or button.
Notes:
When a disc is ejected, the programme is automatically
cancelled.
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
During the programme operation, random play is not
possible.
�
5�
�
●
●
●
Listening to a CD or MP/WMA disc (continued)
Procedure to play back MP/WMA disc
with folder mode on
■
To play back CD-R/RW..
Press the CD button, and load an MP/WMA disc.
After disc is loaded, disc info will be displayed.
Press the FOLDER button and press the FOLDER
( or ) button to select desired playback folder.
(Folder mode on)
Select desired le to be played back by pressing
the or button.
Press the (CD ) button. Playback will start.
File name, Title, Artist and Album name are
displayed if they are recorded on the disc.
Press the FOLDER ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode with the rst track of
the selected folder.
Display content can be changed by pressing the
DISPLAY button.
Note:
If the track of “Copyright protected WMA le” or “Not
supported playback le” is selected during playback, “NO
SUPPORT” is displayed on unit display and the track is
skipped.
1�
2�
�
�
●
●
●
Total number of tracks
Total tracks in chosen folderFolder number
Album display
Counter display Artist display
File name display Title display

Sharp XL-UH1H Specifications

General

Brand	Sharp
Model	XL-UH1H
Category	Stereo System
Language	English