16
1. Place the projector facing a wall or a screen
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than the computer, see
pages 24 and 25.
3. Press the ON/STANDBY button to turn the projector on
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
On the projector On the remote control
INPUT 1 button
INPUT button
ON/STANDBY
button
HEIGHT
ADJUST button
Focus ring
Zoom knob
ON/STANDBY
button
_P. 18
_PP. 21–25
_P. 26
ENTER button
ENTER button
5
4
3
6
4
4
4
3
6
5
4
To Next Page
Loading...
Need help?
General
