Shelly Wave i4 DC - 10 Z-Wave Command Class

10. Z-Wave Command Class
1. ASSOCIATION_V2 [S0, S2]*
2. ASSOCIATION_GRP_INFO_V3 [S0, S2]*
3. BASIC_V2 [S0, S2]*
4. SWITCH_BINARY_V2 [S0, S2]*
5. CENTRAL_SCENE_V3 [S0, S2]*
6. CONFIGURATION_V4 [S0, S2]*
7. DEVICE_RESET_LOCALLY_V1 [S0, S2]*
8. FIRMWARE_UPDATE_MD_V5 [S0, S2]*
9. INDICATOR_V3 [S0, S2]*
10. MANUFACTURER_SPECIFIC_V2 [S0, S2]*
11. MULTI_CHANNEL_V4 [S0, S2]*
12. MULTI_CHANNEL_ASSOCIATION_V3 [S0, S2]*
13. SWITCH_MULTILEVEL_V4 [S0, S2]*
14. NOTIFICATION_V8 [S0, S2]*
15. POWERLEVEL_V1 [S0, S2]*
16. SECURITY_V1
17. SECURITY_2_V1
18. SUPERVISION_V1
19. VERSION_V3 [S0, S2]*
20. ZWAVEPLUS_INFO_V2
Supporting Command Class Indicator
The Device supports the Command Class Indicator V3 (ID 0x50). When the Device
receives an indicator set, the LED blinks according to the received indicator set.
Refer to LED Signalization chapter.