3. About the Device
The Device is a 4-digital inputs module (5-24 V DC) that controls other devices within the Z-Wave
network. It enables manual activation or deactivation of scenes through a switch/push-button.
If the SW is configured as a switch (default), each toggle of the switch will trigger the predefined
scene. If the SW is configured as a push-button in the Device settings, each press of the push-
button will trigger the predefined scene.
4. Electrical diagrams (5-24 V DC)
Connecting to the power grid with power supply 5-24 V DC (Fig. 1-2)
Fig.1 Fig.2
Fig.3
Device terminals:
• ꓕ: 5 - 24 V DC ground terminal
• +: 5 - 24 V DC positive terminal
To Next Page
Loading...
