READ BEFORE USE
This document contains important technical and safety information about the Device, its safe
use and installation.
⚠CAUTION! Before beginning the installation, please read carefully and entirely this guide and
any other documents accompanying the Device. Failure to follow the installation procedures
could lead to malfunction, danger to your health and life, violation of law or refusal of legal
and/or commercial guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or
damage in case of incorrect installation or improper operation of this Device due to failure of
following the user and safety instructions in this guide.
1. Terminology
• Device - In this document, the term “Device” is used to refer to the Shelly Qubino device
that is a subject of this guide.
• Gateway (GW) - A Z-Wave® gateway, also referred to as a Z-Wave® controller, Z-Wave®
main controller, Z-Wave® primary controller, or Z-Wave® hub, etc., is a device that
serves as a central hub for a Z-Wave® smart home network. The term “gateway” is used
in this document.
• S button - The Z-Wave® Service button, located on Z-Wave® devices and is used for
various functions such as adding (inclusion), removing (exclusion), and resetting the
device to its factory default settings. The term "S button" is used in this document.
• Adding/Inclusion - The process of adding Z-Wave device to a Z-Wave network -
gateway. The words included, added, etc. are used in this regard.
• Removing/Exclusion - The process of removing Z-Wave device from a Z-Wave network -
gateway. The words excluded, removed, etc. are used in this regard.
• Learn mode - a state that allows the Device to receive network information from the
gateway.
2. About Shelly Qubino
Shelly Qubino is a line of innovative microprocessor-managed devices, which allow remote
control of electric circuits with a smartphone, tablet, PC, or home automation system. They
work on Z-Wave® wireless communication protocol, using a gateway, which is required for a
configuration of devices. When the gateway is connected to the internet, you can control Shelly
Qubino devices remotely from anywhere. Shelly Qubino devices can be operated in any Z-
Wave® network with other Z-Wave® certified devices from other manufacturers. All mains
operated nodes within the network will act as repeaters regardless of vendor to increase
reliability of the network. Devices are designed to work with older generations of Z-Wave®
devices and gateways.
To Next Page
Loading...
Need help?
General
