shelyak Alpy 600 User Manual

Alpy 600 - user guide
Loosen the three small screws around the spectro-
scope body, and remove the Alpy 600 core element :
You have now a view of all the elements of the Alpy
600: Core element, Objective lens, external body and
nosepiece 1,25”.
As far as possible, standard threads have
been used on the Alpy 600 parts, to allow
you maximum flexibility with your own equip-
ment. For instance, the external body is made
with standard M42x0,75mm threads : you can
use a 2” eyepiece holder instead of the 1,25”
one.
Several slits are available. We’ll see in the next chap-
ters how to change it and under which conditions to
use each of them.
1.4 Mechanical interfaces
The Alpy 600 uses several standard threads for me-
chanical interfaces, to adapt the instrument to your
own setup.
The CCD camera interface is a standard T-mount
thread (M42 x 0.75mm)
The same thread is used on both ends of the exter-
nal body. For instance, you can replace the 1,25” nose-
piece by a 2”, using a common 2” to T-mount adapter.
8

shelyak Alpy 600 Specifications

General

Brand	shelyak
Model	Alpy 600
Category	Measuring Instruments
Language	English