To Next PageTo Next PageWhat to do if other system components don't react to remote control commands from my Sherwood Receiver?
If other system components aren't responding to remote control commands from your Sherwood Receiver, ensure that the DIGI LINK connections are properly made.
General| Frequency Response | 10Hz-100kHz (+0.5dB, -3dB) |
|---|---|
| Total Harmonic Distortion | 0.08% (20Hz-20kHz, 100W) |
| Dimensions | 17.1 x 5.7 x 13.8 inches (W x H x D) |
| Weight | 22.5 lbs |
| Tuning range | FM, MW |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Impedance | 8 ohms |
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Speaker load impedance | 8 ohms |
| Speaker Impedance | 8 ohms |
Covers unpacking, installation, and placement for proper ventilation and operation.
Safety precautions and voltage requirements for USA and Canada.
Safety precautions and voltage requirements for Europe and Australia.
How to select the correct AC voltage for the unit.
How to connect FM and AM antennas.
Connecting various audio/video devices like DVD players, VCRs, etc.
Connecting digital audio sources like CD players via optical or coaxial.
How to connect front, center, rear speakers and subwoofer.
Step-by-step guide to selecting and playing audio sources.
Details the 6 available surround sound modes.
Explains how to adjust speaker delay for synchronization.
Steps to choose a surround mode.
Guidelines for optimal speaker positioning for surround sound.
Choosing from 11 speaker configuration presets.
Choosing which speaker channel to adjust.
Modifying the volume level of a selected channel.
Adjusting levels for all speakers.
Modifying delay times for speakers.
Reproducing multi-channel audio through two speakers or headphones.
Automatically searching for radio stations.
Storing favorite radio stations.
Selecting stored radio stations.
Steps to resolve no power issues.
Troubleshooting steps for no audio output.
Troubleshooting remote control issues.
