To Next Page
H
hmoralesSep 10, 2025
How do I fix no sound from surround back speakers on my Sherwood RD-7503 Receiver?
- KKatherine WhiteSep 10, 2025
If you're not getting sound from the surround back speakers on your Sherwood Receiver, the input signal format or current surround mode may not support 7.1 (or 6.1) surround. Also, check if the surround back channels' power amplifier is assigned to "BI-AMP" or "ROOM 2" and assign the power amplifier to the surround back channels. Ensure that the master volume and surround back level are not too low, and verify that the surround back speaker setting is not set to "NO"; select the desired surround back speaker setting.
General
Weight and Dimensions
