Why is my Sherwood RD-8500 hissing during AM reception?
If you're experiencing continuous or intermittent hissing noise during AM reception on your Sherwood Receiver, especially at night, the noise might be caused by motors, fluorescent lamps, or lightning. Try to keep the receiver away from these noise sources.
What to do if other Sherwood components don't react to remote commands?
If other Sherwood components aren't responding to remote control commands, ensure that the DIGI LINK connections are properly made.
Essential safety warnings, electrical requirements, and placement for ventilation.
Connecting digital audio inputs/outputs and speaker terminals.
Explanation of remote buttons and Digi Link system control capabilities.
Step-by-step instructions for entering setup codes to control external devices.
Turning on the unit, selecting input sources, and activating speakers for sound.
Explanation of DTS, DTS-ES, Neo:6, Dolby Digital, and Dolby Digital EX surround modes.
Details on Dolby Pro Logic, Pro Logic II, and Dolby Virtual surround sound modes.
Guidelines for positioning front, surround, and back speakers for optimal acoustics.
Selecting speaker types (Large/Small) and adjusting settings via the setup menu.
Detailed speaker settings (distance, crossover) and memorizing configurations.
Choosing decoding modes and surround sound modes for optimal audio playback.
Using test tone and manual methods to adjust individual channel volume levels.
Resolving issues related to power, sound output, and speaker connections.
Troubleshooting poor reception, station tuning, and remote control malfunctions.
To Next Page
General
