7
© 2012 SHFL entertainment, Inc. Deck Mate® Service Manual 20121009
Confidential
4.0 Operation
Start Up and Dealing Procedures
Plug the power cord into a 110V/60Hz or 220V/50Hz outlet. Turn the power
switch at the shuffler to the ON position. The DECK MATE
®
shuffler will perform
system initialization. If there are cards left in the machine it will expose them
and present instructions regarding card removal.
Based on the number of decks and the number of cards selected, the VFD
(Vacuum Fluorescent Display) message panel will show one of these messages:
The dealer will load the cards into the feeder compartment. After the cards are
loaded, the shuffle begins automatically. The message panel will display:
When the shuffle is complete the message panel will display:
When the second deck is placed into the feeder the door automatically opens
and raises the shuffled deck to be dealt. To close the game or to change both
decks at the same time, press the GREEN button to unload the last shuffled
cards.
For the poker room model, the GREEN button must be pressed to activate the
door opening to gain access to the feeder area.
When the GREEN button is pressed, the door opens and the message panel will
display:
When the cards are loaded, the door will close and the message panel will
display:
Load Cards. Single Deck
(52 Cards)
Shuffling . . . .
Single Deck (52 cards)
Shuffle Complete
Load Cards or Push Green
Load Cards. Poker
(52 Cards)
Shuffling . . . .
Poker (52 cards)
Load Cards. Double Deck
(104 Cards)
To Next Page
Loading...
