SHFL DECK MATE BLACKJACK - Cleaning and Preventative Maintenance

To Next Page

To Previous Page

Confidential

7.0 Cleaning and Preventative Maintenance

2 Week Maintenance

• Remove side covers and blow out or vacuum top of machine

• Clean rollers with 99% isopropyl alcohol

• Brush or blow off all sensors

• Check for debris on shaft between CIS and COS and clean if needed

• Clean grooves in gripper blocks

• Check brake roller clearance

• Run auto setup with the casino’s cards

• Test run with casino’s cards and check for proper operation

1 Month Maintenance

• Perform 2 week maintenance

• Remove bottom cover and blow out or vacuum bottom of machine and

filter

• Check that the platform is level with the grippers using fixture F1094

• Remove CIS/COS sensor assembly and clean transmitters and receivers

• Clean the linear guide between the gripper mounting blocks

6 Month Maintenance

• Perform 2 week and 1 month maintenance

• Clean and lubricate inside diameter of gripper idler pulley

• Replace the 2 urethane rollers on each side of lower brake roller

• Check Red And Green buttons for tightness

12 Month Maintenance

• Perform 2 week, 1 month and 6 month maintenance

• Replace all urethane rollers

• Replace gripper blocks

Related product manuals