What to do if the serial communication function doesn't work with a USB serial converter on Shimadzu Laboratory Equipment?
First, verify that the correct COM number has been set in the Windows settings. If the issue persists, the driver provided with the USB serial converter may not be set up correctly. Please refer to the Shimadzu website for details on checking/changing the COM number and setting up the driver.
Why doesn't the serial communication function work after rebooting the PC with Shimadzu AP324X AP224X Laboratory Equipment?
The serial communication function cannot be used if Balance Keys has not been started up. For details on Balance Keys, refer to the Shimadzu website.
What to do if the cells are not transferred when entering data on Excel with Shimadzu AP324X AP224X Laboratory Equipment?
This issue may occur if Excel is not set to move cells after pressing the Enter key. To resolve this, in Excel, go to File > Options > Advanced Settings, and enable 'Move cell after pressing the [Enter] key.' Also, ensure that the Japanese conversion function in Windows is set to OFF, as this can interfere with data transfer.
Why do operations sometimes seem strange with Shimadzu Laboratory Equipment?
Strange operations can occur if the communication speed is set too slow in Balance Keys, depending on your PC's performance. Adjust the communication speed to align with your PC's capabilities. Also, if the interval for transmitting data from the balance is too short, it can cause malfunctions. Ensure data is transmitted after it has been displayed on the screen and avoid using the continuous output function. Additionally, ensure nothing is touching the PC keyboard or mouse when data is being transmitted from the balance.
What to do if garbled text is loaded onto the PC from Shimadzu AP324X AP224X?
If garbled text appears on your PC, the serial communication function settings on either the balance or the PC are likely incorrect. Reset these settings to resolve the issue.
Covers usage, installation, work/operations, and general safety advice.
Details risks associated with disassembling, modifying, or repairing the product.
Guidelines for safe inspections, maintenance, and handling during emergencies/outages.
Details selecting an installation site and attaching initial balance components.
Steps for adjusting the balance's horizontal level and powering it on.
Identifies and explains components on the front, top, and side of the balance unit.
Guides users through basic weighing procedures and how to end measurements.
Explains CAL key setup and the available methods for balance calibration.
Details procedures for calibrating and testing with internal and external weights.
Covers automatic sensitivity adjustment (PSC) and time-scheduled calibration (Timer CAL).
Guides on performing periodic inspections and basic error checks.
Provides solutions for common problems and explains various error messages.
Instructions for cleaning and maintaining the balance unit and its ionizer.
Guidelines for daily/periodic inspections and selecting/managing calibration weights.
General| Capacity (AP324X) | 320 g |
|---|---|
| Capacity (AP224X) | 220 g |
| Readability | 0.1 mg |
| Linearity (AP324X) | ±0.2 mg |
| Linearity (AP224X) | ±0.2 mg |
| Interface | RS-232C |
| Model | AP324X AP224X |
| Repeatability (AP324X) | 0.1 mg |
| Repeatability (AP224X) | 0.1 mg |
| Stabilization Time | 2 seconds |
| Display | LCD |
| Power Supply | AC adapter |
| Operating Temperature | 5 to 40 °C |
| Pan Size | Ø 80 mm |
To Next Page