51
32. PARTS LIST
Optional Peripherals
Part Name Part No. Comments
Electronic Printer
EP-60A
321-42008-10
Including AC
adaptor for 100V
Electronic Printer
EP-60A
321-42008-20
Including AC
adaptor for
100~250V
Electronic Printer
EP-60A
321-42008-90
Without AC
adaptor
RS232C Cable
25P-9S (1.5 m)
321-60754-01
For IBM-PC/AT,
DOS/V
(Null modem type)
RS-232C Cable
25P-25P (1.5 m)
321-60753-01
For some models of
NEC PC-98 series
(IEEE standard
size)
(Null modem type)
Specific gravity
weighing kit
321-60550
Maintenance Parts
Part name Part No. Remarks
Pan 321-60453
Pan supporter 321-60459 Including cushion
Anti-drift ring 321-41205
AC adaptor 074-83004-01
Level screw 321-53530-30
Glass door ASSY,
right
321-60445 Including the knob
Glass door ASSY,
left
321-60444 Including the knob
Glass door ASSY,
upper
321-60468 Including the knob
Front glass 321-60430
33. USING PERIPHERAL UNITS
Electronic Printer EP-60A
Procedure
(1) Set the communication format of the balance to “intFACE-iF:F1.”
(2) Disconnect the balance power cable, then connect the electronic
printer to the DATA I/O connector provided on the back of the
balance.
(3) ) For the details, see the Instruction Manual for the Electronic
Printer EP-60A.
To Next Page
Loading...
Need help?
General
