17
BT-E8010/BT-E8014
1.
Insert the battery from its base.
•
Align the indentation in the bottom of the battery with
the convex section on the mount and insert the battery.
2.
Slide the battery.
•
Insert the battery until you hear a click.
3.
Remove the key.
•
Return it to the lock position and remove the key.
BT-E8020
This section describes an example of a frame design where the battery is removed/installed from the bottom.
1.
Insert the battery from its base.
2.
Insert the battery.
•
Insert the battery until you hear a click.
To Next Page
Loading...
