24
Power ON/OFF
•
The power cannot be turned ON while charging.
•
When the bicycle has been stopped for 10 minutes, the auto power OFF function automatically switches the power OFF.
NOTICE
• Do not step on the pedal when turning the power ON/OFF. Doing so may cause a system error.
• When turning the power ON, confirm that the battery is securely locked to the battery mount.
When turning the power ON with a cycle computer, if it is installed
•
The power does not turn ON if the built-in battery of the cycle computer is not adequately charged.
•
The built-in battery of the cycle computer is only charged when the cycle computer screen is on.
1.
Press and hold the power button.
SC-E6010: 2 seconds
SC-E6100: 0.5 seconds
Power button
Power ON from the satellite power button
•
The position of the satellite power button differs depending on the frame design.
•
The power does not turn ON if the built-in battery of the satellite power button is not adequately charged.
•
The built-in battery of the satellite power button is charged during (main) battery discharge or when the battery is being charged via
the charging port of the battery mount.
1.
Press and hold the power button for 0.5 seconds.
•
The LED does light up for a short period of time if it detects
that the satellite power button is held down. If the power is
turned ON normally, the LED will light up for several
seconds.
•
The LED flashes twice when turning the power ON, if the
built-in battery capacity of the satellite power button has
decreased. The built-in battery will be charged if you leave
the power ON for a little while.
LED
Power button
To Next Page
Loading...
