Shimano Steps BT-E8035 - Page 27

25
Power ON from battery when the battery is installed
With the BT-E8010/BT-E8020/BT-E8035, press and hold the power switch for 6 seconds to force the power OFF.
1. Press the battery power switch. The LED lamp turns on and the battery level is indicated.
BT-E6000/BT-E6001
Power switch
BT-E8010/BT-E8014
Power switch
BT-E6010
Power switch
BT-E8020
Power switch
BT-E8035
• The position of the power switch differs depending on the frame design.
Power switch