18
BT-E8035
This section describes an example of a frame design where the battery is removed/installed from the bottom.
1.
Insert the battery from its base.
2.
Insert the battery.
•
Insert the battery until you hear a click.
CAUTION
•
After pushing the battery in, pull the battery to confirm that it is locked securely.
Removing the battery
CAUTION
•
Firmly hold the battery when removing or carrying it to make sure that you do not drop it.
BT-E6000/BT-E6001
The position of the key does not affect battery insertion. The battery can be inserted regardless of the key position.
1.
Insert the key.
Turn the power OFF, and then insert the key into the key
cylinder of the battery mount.
Key
Key cylinder
Press the power switch
to turn the power OFF.
2.
Turn the key until you feel resistance.
To Next Page
Loading...
