16
Proper use of the battery
Charging can be carried out at any time, regardless of the remaining battery, but please fully charge the battery in the
following cases: Be sure to use the dedicated battery charger.
•
The battery cannot be used at the time of purchase. Before riding, be sure to fully charge the battery.
If the battery has become completely empty, charge it as soon as possible. If you leave the battery without charging it, it
will cause the battery to deteriorate.
•
If the bicycle will not be ridden for a long period, store with the battery level around 70%. Also, make sure to charge the battery
every six months to ensure that it does not completely discharge.
Installing the battery
CAUTION
•
Ride the bicycle after confirming that the battery is locked. If the battery is not locked securely, it may become detached and fall
down while riding.
•
Confirm the following before riding the bicycle.
-
That the battery is securely locked to the battery mount
-
That the key has not been left in the battery
NOTICE
Confirm that the cap of the charging port is closed before riding.
BT-E6000/BT-E6001
1.
Insert the battery into the rail from the rear of the bicycle.
•
Slide the battery to the front and push it in firmly.
2.
Remove the key.
•
Return the key to the locked position, and then remove
it.
Rail
To Next Page
Loading...
