21
Integrated mount type
The following procedure uses a type of bicycle where the battery is installed/removed from the lower side of the down tube as an
example.
BT-E8020
1.
Use the following procedure to insert from the lower side
of the battery.
(1) Insert from the lower side of the battery.
(2) Slide the battery. Push it in firmly until you hear it click
into place.
(2)
(1)
NOTICE
Do not install or remove the battery with the key inserted or the keyhole cap left open. The battery could make contact with the handle on the key or the
keyhole cap, damaging it.
To Next Page
Loading...
