24
Integrated mount type
If a battery cover from another company is installed, remove the battery cover first. The following procedure uses a type of bicycle
where the battery is installed/removed from the lower side of the down tube as an example.
BT-E8020
1.
Open the keyhole cap.
Press the power switch to turn the power OFF, and then open the keyhole cap.
Power switch
Keyhole cap
2.
Release the battery lock.
(1) Insert the key into the key cylinder of the battery mount.
(2) Turn the key clockwise.
(3) Push the key in.
The battery is unlocked.
(1)
Key cylinder
Key
(2)
(3)
(3)
To Next Page
Loading...
