10
Basic operation
Turning the power ON/OFF
The power of this product is linked with the main power of the assist bicycle. When the main power is turned ON, all
components connected to the drive unit of the assist bicycle are also turned ON (such as assist driving, the power of this
product, the electronic gear shifting mechanism, and the lights).
For the procedure for turning the main power ON/OFF, refer to the SHIMANO STEPS user's manual.
NOTICE
• Before turning the power ON, please refer the SHIMANO STEPS special battery and parts user's manual to check the following.
- The battery is firmly attached to the battery mount
• The power cannot be turned ON while charging.
• If the bicycle is left unused for 10 minutes after turning the power ON, the power automatically turns OFF (auto power OFF function).
When the main power is turned ON, a screen similar to that shown below is displayed, and then switches to the main screen.
To Next Page
Loading...
