19
Setting the assist bicycle function
Turning the light ON/OFF [Light]
Turns the light connected to the drive unit ON/OFF.
1.
Setting menu screen ⇒ [Light] ⇒ [ON] / [OFF]
The display will automatically return to the setting menu screen.
Setting the gear position when starting from a stop [Start mode]
Automatically shifts to the set gear position when the bicycle starts from a stop.
Setting items Explanation
[OFF] Do not set the start mode.
[1], [2],...*1 Select the gear position.
*1 A gear position up to the maximum gear position of the shifting unit installed to the assist bicycle can be set.
1.
Setting menu screen ⇒ [Start mode] ⇒ <↑> or <↓> to select the gear position ⇒ <F>
The display will automatically return to the setting menu.
Dynamically changing the riding comfort [Assist customize]
The riding comfort of the assist bicycle differs greatly according to the maximum torque of the drive unit and how much
assistance is provided for pedaling. This product has multiple recommended settings registered that can be switched
according to your preference. Details of the settings can be checked with E-TUBE PROJECT and the settings can be
customized. Refer to the help manual for E-TUBE PROJECT for details.
Setting items Explanation
[Profile 1] Changes to the riding comfort registered in [Profile 1].
[Profile 2] Changes to the riding comfort registered in [Profile 2].
1.
Setting menu screen ⇒ [Assist customize] ⇒ [Profile 1] / [Profile 2]
NOTICE
Depending on the setting, battery consumption may increase and the assisted traveling range may greatly decrease.
To Next Page
Loading...
Need help?
General
