23
Troubleshooting
Recovering from the RD protection function [RD protection reset]
In order to protect the system from falls etc., the RD Protection function will operate when the rear derailleur is subjected to
a strong impact. The connection between the motor and the link will be momentarily severed so that the rear derailleur can
no longer operate.
When RD Protection Reset is run, it will restore the connection between the motor and the link, and recover the rear
derailleur from RD Protection.
• This function is enabled for electronic gear shifting rear derailleur models only.
1.
Setting menu ⇒ [RD protection reset] ⇒ [OK]
An illustration of a crankset is displayed on the screen.
2.
Turn the crank clockwise with the rear wheel lifted up.
The rear derailleur moves, and the connection between the motor and link is restored.
Gear shifting adjustment with the electronic gear shifting unit [Adjust]
If gear shifting feels abnormal, contact the place of purchase.
To Next Page
Loading...
Need help?
General
