EasyManuals Logo

Shimano Steps SC-EM800 User Manual

Shimano Steps SC-EM800
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
25
Code*1 Indication conditions
Operational restrictions
being displayed
Remedy
W200
(W020)
The power was
turned OFF due to
the temperature
exceeding the
guaranteed
operating range.
No system functions will
start.
If it has exceeded the temperature in which discharge is
possible, leave the battery in a cool place away from
direct sunlight until the internal temperature of the
battery decreases sufficiently. If the temperature has
fallen below the temperature where discharge is
possible, leave the battery outdoors or other suitable
area until the internal temperature rises to the
appropriate temperature.
If the error persists, contact your place of purchase or a
distributor for assistance.
W302
(W032)
The installed shifting
unit differs from the
shifting unit
configured in the
system.
Unable to perform gear
shifting.
Have your place of purchase perform the following.
Check the current system status in E-TUBE PROJECT
and replace the shifting unit that is currently set.
If the error persists, contact your distributor for
assistance.
*1 The instruction in the parentheses is displayed according to the drive unit connected.

Other manuals for Shimano Steps SC-EM800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shimano Steps SC-EM800 and is the answer not in the manual?

Shimano Steps SC-EM800 Specifications

General IconGeneral
BrandShimano Steps
ModelSC-EM800
CategorySwitch
LanguageEnglish

Related product manuals