Shimano STEPS E7000 SERIES - Page 38

36
 Light
Configure the battery-powered light setting.
1. Enter the [Light] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Light], then
press A.
2. Press Assist-X or Assist-Y to select the required setting.
Assist
XY
X
Y
Configurable items Details
[ON] Keep light always on
[OFF] Keep light always off
3. Press A to confirm the setting.
• After confirmation, the screen will automatically
return to the menu list screen.
Assist
A