Shimano STEPS E7000 SERIES - Page 37

35
 Clock
Configure the "Clock" setting. First set the "hour" and then set the "minute."
In step 2 and 4 in below procedure, you can change the values quickly by holding down Assist-X or Assist-Y.
1. Enter the [Clock] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Clock], then press
A.
2. Press Assist-X or Assist-Y to adjust the time.
• Press Assist-X to increase the numbers.
• Press Assist-Y to decrease the numbers.
Assist
XY
X
Y
3. Pressing A enables the set value and moves you to the
minutes setting.
Assist
A
4. Press Assist-X or Assist-Y to set the minutes.
• Press Assist-X to increase the value.
• Press Assist-Y to decrease the value.
Assist
XY
X
Y
5. Press A to confirm the setting.
• After confirmation, the screen will automatically
return to the menu list screen.