ShinewayTech OFS–95 - Page 43

Menu Operation
at wavelength of 1550 nm.
Automatic arc calibration works in this
splice mode.
4
AUTO NZ
For splicing Non-zero
dispersion-shifted fiber (ITU-T G655).
The MFD is 9 to 10 um at wavelength
of 1550 nm.
Automatic arc calibration works in this
splice mode.
5
AUTO MM1
For splicing Multi-mode fiber (ITU-T
G651). Core diameter: 50.0 to 62.5
um.
Automatic arc calibration works in this
splice mode.
6
SM
For splicing standard Single-mode
fiber (ITU-T G652). The MFD is 9 to
10 um at wavelength of 1310 nm.
User can edit every parameters of this
splice mode. Like prefuse power,
prefuse time, arc power, arc time,
align, proof test, and so on.
The manual splicing operaiton is
provided. Automatic arc calibration
doesn’t work in this splice mode.
7
DS
For splicing Dispersion-shifted fiber
(ITU-T G653). The MFD is 7 to 9 um
at wavelength near 1550 nm.
User can edit every parameters of this
splice mode. Like prefuse power,