12(44)
1.4 Safety Regulations
1.4.1 Safety Signs and Labels
Please abide by the safety guide when you operate the machine so as to
prevent damage of the machine and personal injuries.
All electrical components should be installed by qualified electricians.
Turn off main switch and control switch during repair and maintenance.
Warning! High voltage!
This mark is attached on the cover of the control box.
Warning! Be careful!
Be more careful when this mark appears.
Attention!
No need for regular inspection because all the electrical parts in the
control unit are fixed tightly!
1.4.2 Transportation and Storage of the Machine
Transportation and storage of the machine
1) CD series are packed in crates or plywood cases with wooden pallet at the
bottom, suitable for quick positioning by fork lift.
2) After unpacked, castors equipped on the machine can be used for ease of
movement.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced, although it should also be
handled with care when lifting the machine for fear of falling down.
5) The machine and its attached parts can be kept at a temperature from -25 ℃
to +55 for long distance transportation and for a short distance, it can be ℃
transported with temperature under +70.℃
To Next Page
Loading...
