24(33)
F.05
Mixing count cycle start setting. Count since the first time start
up, and start once mixing after repeatedly started several
suction actions.
Set it to 1: mixing in each suction.
Set [F.03] to 0: Don’t mix the materials.
1 time 1-9 times
F.06
Screen cleaing time setting before suction
Set it to 0: no cleaning before suction
Corresponding action: R01
0 secs. 0-99 secs.
F.07
Screen cleaing time setting after suction
Set it to 0: no cleaning after suction
Corresponding action: R11
0 secs. 0-99 secs.
F.08
Cleaning action cycle
Start once [F.06] or [F.07] cleaning action after repeatedly
started several suction actions.
Set it to 1: Clean the screen after each suction
3 times 1-99 times
F.09
Suction cycle waiting time
After once suction action, the waiting time before the next
suction action.
Set it to 0: Don’t wait.
Corresponding action: N03
(Unit
10
secs.)
0-9990
F.10
Shortage Times Count Alarm
Set the times for the alarm that the material doesn’t drop into
the hopper before machine shutdown.
Alarm cleaning method:
1.The alarm will dismiss when it sucked the materials again.
2.Press ENT key on the panel to cancel.
3.Turn on/off the power again.
Set it to 9 to cancel the function.
Corresponding action: A.01
3 1-9 times
F.11
Shortage Times Count Stop Alarm
Set the times for the alarm that the material doesn’t drop into
the hopper before machine shutdown.
Alarm cleaning method:
1.Press ENT key on the panel to cancel.
2.Turn on/off the power again.
Corresponding action: A.04
3 [F.10]-99
F.12
The time to wait motor stop（suitable for SAL-430/460）
After motor start running, it’s necessary to wait the countdown
time before the next action.
0 secs. 0-99 secs.
F.13
Alarm buzzer sound type
0:Lasting sound
1:Slow intermittent sound
2:Fast intermittent sound
0 0-2
To Next Page
Loading...
