Shini SAL-810 - Main Body and Filter Barrel Cleaning

32(33)
6.2 Main Body Cleaning
When machine in use, clean the filter periodically or when the suction force is
reduced. Take out the filter from the main body, clean the dust accreted on it
to ensure good ventilation of the air and to enhance loading capacity.
Filter Inspection and Storage Hopper Cleaning
Filter barrel
Filter
Filter barrel
cover
Picture 6-2: Filter Barrel Cleaning Drawing
1. Loosen the snap hook, take out the filter barrel and the filter; blow off the dust
with a high-pressure air gun from the inside to outside; take down the filter
barrel cover and remove the dust in it.
2. Clean the filter. Period: daily