Shini SAL-810 - Specification

9(33)
SAL-810G/820G/830G (Main controller)
H
D
W
1.3.2 Specification
Table 1-1: Specification
Main Unit Hopper Receiver(s)
RS-485
communication
function
Conveying
Hose Dia.
(inch)
Air
Suction
Pipe Dia.
(inch)
Conveying
Capacity
(kg/hr)
Model Ver.
Blower
Type
Blower
Power
(kW)
Dimensions
(mm)H×W×D
Weight
(kg)
Recommended
Model
Hopper
Capacity
(L)
Dimensions
(mm)
H×W×D
Weight
(kg)
SAL
-810G
B Induction
0.75
(3Φ)
740×400×410 58
SMH-6L
6
460×260×315 6
● 1.5 1.5 300 SVH-6L 600×285×305 7
SHR-6U 420×285×360 6
SAL
-820G
B Induction 1.5 (3Φ) 740×400×410 65
SMH-12L
12
515×300×350 7
● 1.5 1.5 480 SVH-12L 695×300×360 11
SHR-12U 470×315×400 7
SAL
-830G
B Induction
1.85
(3Φ)
785×400×410 68
SMH-24L
24
720×325×375 9
● 2 2 700 SVH-24L 1120×360×375 13
SHR-24U 690×315×400 9
Notes: 1) "SVH" stands for photosensor hopper receiver; " SMH " stands for vacuum hopper receiver. " SHR-U " stands for
Euro-Hopper receiver.
2) Test condition of conveying capacity：Plastic material of bulk density 0.65kg/L, dia. 3~5 mm, vertical conveying height:
4m, horizontal conveying distance: 5m.
3) "●" stands for standard, "○" stands for options, "-" stands for none.
4) All SAL-810G/820G/830G hoppers adopt the 4P heavy-duty connector.
5) Power supply: 3Φ, 230/400/460/575V, 50/60Hz.