24(45)
11) When the water source quality is poor, and the embient environment of the
cooling tower is harsh, the cooling water and chilled water loop must be
equipped with the filters and cleaned regularly.
12) The circulating circuit of chilled water shall be covered with insulation layer
to avoid the loss of cooling capacity and pipeline dripping.
13) Since this series of machine is cooled by cooling water circulation, the user
must provide enough cooling water for the water chiller according to the
required water amount in the manual. Otherwise, the high-pressure
pressure of the machine will be high, and the cooling capacity will decline.
The power wire connection of the water chiller must be done by the
professional electrician! The circuit of the water chiller is not allowed to be
modified without the consent of the company. If it is changed, our company
is not liable for the machine damage.
To Next Page
Loading...
Need help?
General
