Shini SIC-W User Manual

34(45)
4.5 Temperature Controller 2(
Used for
4.5.1 Temperature setting method
Picture 4-2 ：
Temperature Controller 2
Table 4-4 ：
The Instruction of Temperature Controller 2
Button
Code
Normal Operation
Press this button alone
Press it with other
buttons
1
Press it for 3 secs. at least:
startup/shutdown
Press and hold
it with the
defrost button 3,
to make
the forced cooling work or
stop
2
-1 sec.: display/ set the
value;
- Last more then 3 secs;
Enter the parameter setting
menu (input password 22)
- Set the audible alarm to
mute (buzzer)
-
3
- Last 3 secs at least: to
make the defrosting work
or stop
Press and hold it with the
compressor button 1
together to make the
forced cooling work or
stop
Used for
20HP-50HP)
Temperature Controller 2
The Instruction of Temperature Controller 2
Startup
Press it with other
it with the
to make
the forced cooling work or
-
Press and hold
1 sec. to reset
current EZY
setting
Press and hold
(fan button 2 and
defrost button 3)
together to
activate the
parameter reset
program
Press and hold it with the
compressor button 1
together to make the
forced cooling work or
Press it for 1
sec. to display
the hardware
version

Shini SIC-W Specifications

General

Brand	Shini
Model	SIC-W
Category	Chiller
Language	English