Shini SIC-W User Manual

43(45)
6.2.2 Evaporator
The SIC-W series of water chiller adopts tube-in-shell evaporator, and its inner
side of the heat emission pipe will pile up a great deal of water scaleafter long time
use, which will influence the heat emission effect, so it is necessary to clean the
evaporator at fixed periods in order to keep its working performance. Clean the
evaporator according to the method of cleaning the condenser, and the remove the
water scale from the drainage port.
Attention!
Drain the water inside the evaporator and the condenser away when the
machine stop running under 0℃. If the evaporator freezes, drain the water
in it before restarting.
Picture 6-3：Water Drainage Port

Shini SIC-W Specifications

General

Brand	Shini
Model	SIC-W
Category	Chiller
Language	English