16(65)
water to avoid potential troubles caused by the water.
4) Plastic film should be used to protect the machine from dust and rains.
Working environment
The machine should be operated:
1) Indoors in a dry environment with maximum temperature +45℃ and humidity
not more than 80%.
Do not use the machine:
1) If it is with a damaged cord.
2) On a wet floor or when it is exposed to rain to avoid electrical shock.
3) If it has been dropped or damaged until it is checked or fixed by a qualified
serviceman.
4) This equipment works normally in the environment with altitude within 3000m.
5) At least a clearance of 1m surrounding the equipment is required during
operation. Keep this equipment away from flammable sources at least two
meters.
6) Avoid vibration, magnetic disturbance at the operation area.
Rejected parts disposal
When the equipment has run out its life time and can not be used any more,
unplug the power supply and dispose of it properly according to local code.
Fire Hazard
In case of fire, Co
2
dry powder fire extinguisher should be applied.
Please abide by the safety guide when you operate the machine so as to
prevent damage of the machine and personal injuries.
All electrical components should be installed by qualified electricians.
Turn off main switch and control switch during repair and maintenance.
Warning! High voltage!
To Next Page
Loading...
Need help?
General
